1 / 3
Wooden track simple bridge (Playtive, Lillabo, Brio)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bridge for Playtive train, simpler design from the original part.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
I designed it for 41 mm width track. Two versions, one with hole and second solid. Not much difference in speed print, just some filament savings. Walls are 1,6 mm, 4 layers assuming that you are using 0,4 nozzle.
I made this to save some time and filament instead of printing complicated bridges. If you have problem with stability of the truck use double tape, it will work well with wood.
Printed with layer height 0.28 and 15% of infill.