Voron v0.1 Tophat on v0.2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Voron v0.1 style tophat that is compatible with the new hinges and camlock of the v0.2
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 293
- Wydruki
- 2
- Wyświetlenia
- 2154
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hey everyone! So there was I really excited that I had finally bought my Voron v0.1 kit… when I saw that the v0.2 was released 3 days later. Luckily I had not printed anything and the v0.2 changes are mostly to the printed parts. One of the biggest changes though is the tophat. I didn't want to go out and already buy new parts so I decided to remix the tophat so that it fits the v0.2 and the new features that being the camlocks and hinges.
The main features are:
- Printable on the v0. (Most of the hinged ones I saw are not.)
- Hinges are printed on their side so they don't rely on layer adhesion to hold the tophat.
- Makes use of the v0.2 hinges and camlocks.
You're gonna need a bit of extra hardware:
- 4x M3 x 8
- 4x Threaded inserts
Quickly explained:
- Put the threaded inserts into the sockets of the rear frame pieces then attach the hinges with M3 x 8s.
- For the front bottom corners insert threaded inserts on the bottom and then follow the v0.2 to set the M3 x 8 screws for camlocks.
- For fastening the frame together and attaching the panels simply use the original v0.1 pieces. (Mid clips and upper corners.) https://github.com/VoronDesign/Voron-0/tree/Voron0.1/STLs/Tophat
DISCLAIMER!
It is a tight fit but I got it working with minimal effort and no issues while printing. Do keep in mind that the cable will rub against the top panel and this might lead to scratches, so far for me its only visible if I flash a light directly.
After you finish assembly I would suggest you check for ease of movement since it is a bit of a tight fit. If you have an umbilical and are experiencing issues with you cable being too stiff what I did to resolve this was I first removed the heatshrink and then I went on to shorter my bowden tube as much as possible.
IMPORTANT!
Since the front bottom corners take inserts for the camlock screws I had to alter the hole position for the front frame parts, this means that if you have already printed front frame parts these wont fit. This is why I uploaded the whole frame. DO NOT use the front frame parts from the voron stls.
If there is someone that would like to reuse their front frame parts to fit this mod, drop a comment and I will try to come up with something.
Happy printing!
UPDATE 03.04.2023
- Added unibody frame.
- Added step file.