Moock Calipers Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple quick design that lets you hang your calipers using some double sided tape.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed quick access for some of my equipment that I use for 3d printing but I didn't have a lot of space. I have have a small apartment so my dresser is right next to my computer where I do most of my work. So using some strong double sided tape I mounted these calipers to my dresser and boom, quick access tool. I used tape because I don't have any screws for wood and I already had this tape laying around. It works very well for small things, like this, while leaving minimal to no damage after being removed.
I printed this vertically with supports on.
.2mm layer height
.4mm nozzle