Dual Z kit ender 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Double z kit printed with single stepper motor
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 1240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm using a 620mm long T2.5 belt. The belt tensioner can be adapted to several lengths because you can move it on the gate and this changes the tensioning force. I think a belt between 610 and 630 should work. However I sized for 620mm.
For assembly you will need buy:
- M5x10 screws with T-nuts 10x
- M8x35 screw with M8 nut 1x (For fixing the tensioner pulley)
- Worm gear replacement kit (nut and screw) for ender 3
- Belt T2,5 620/6mm
- M5 grub screws 6X (for tightening the pulleys on the worms)
- 608 bearing 3X (for top bearings and belt tensioner)
- 6000 bearing 1X (for bottom landing)
You also need to print the worm nut holder which I didn't draw myself. I used this model which works perfectly:
https://www.printables.com/fr/model/323711-ender-3-dual-z
My tensioner is in 2 different colors because I finished a spool. It should be printed as solidly as possible, Minimum PETG at best PC.
Please share your creations or improvements
The kit can be removed in less than a minute by simply removing the belt and unscrewing the worm