Rocket Display Tree V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a variation on the original Rocket Display tree that uses a 1" round Dowel
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a variation on the original Rocket Display Tree which replaces the individual pins with a 1" dowel that runs through the entire tree. I received a few comments that the original pieces were not tight enough on printed on some printers and the tree was leaning over.
This one will solve that problem. For testing, I used a 1" x 48" dowel I bought at Home Depot for $4 and change; Link here
This provides significantly more rigidity, and you should be able to double the height as long as you manage the weight distribution.