IK75 Keyboard Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IK75 Keyboard Foot
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Why I Made This
The keyboard feet that come with the Feker IK75 don't have the strongest latching mechanism and I managed to break mine
Description
This was my first time using Fusion360 and I whipped this up fairly quickly. I'm sure the design is unnecessarily complex but I've attached the project file anyway. The position snapping mechanism are extremely small details but do work on this model hence why this should be printed at 0.1mm resolution.
Ending Note
There is an issue with the inner foot attaching to this because the tolerances are too tight. I also missed a fillet on one of the position snap divots but it's minor at such a small scale.