New & Improved Split Happy Pumpkin (single extruder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got tired of doing filament swaps so I wanted to separate out the stem from the head.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 142
- Wydruki
- 3
- Wyświetlenia
- 697
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got tired of doing filament swaps so I wanted to separate out the stem from the head. All files included for convenience. Any glue for the Stem and Head will do.
Print instructions
As from the original model:
Body
No infill needed.
Head
10% infill
No supports needed since all bridging will be hidden from view and will not affect the moving parts.
Paint the eyes and mouth. I used a sharpie, just watch the bleeding.
Stem
10% infill; I printed this at the same time as the Arms
Arms
Attach the arms to the body using a piece of filament or round toothpick.
Connect the hooks on the arms with a small rubber band.