Assorted set of mouse gliders, mouse skates or mouse feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom mouse feet for repairing various brands of computer mice
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 1222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I had a bunch of computer mice that I opened for switch replacement and their old feet (gliders, sliders, skates) were damaged. So, time to use the printer and print new ones !
There are 3 sets of pads here, matching the following brands (possibly other brands too):
- a vertical mouse from CSL, model 300569 (sold on Amazon)
- a Hama model 62807
- a Serioux Baran gaming mouse (this one is the trickiest)
The 2mm ones are a bit thicker and have a fillet, use them if you intend to sand them down a lot (or prefer thicker feet).
The 1mm ones are ready to install directly.
Ideally, these should be printed in nylon (the lowest friction). Printing on a smooth PEI sheet should give you a nice and smooth surface already. Should you wish to polish them some more, I highly recommend getting a set of Micromesh pads which go up to 12000 grit.