Assorted set of mouse gliders, mouse skates or mouse feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom mouse feet for repairing various brands of computer mice
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 62
- Makes
- 0
- Views
- 1,222
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I had a bunch of computer mice that I opened for switch replacement and their old feet (gliders, sliders, skates) were damaged. So, time to use the printer and print new ones !
There are 3 sets of pads here, matching the following brands (possibly other brands too):
- a vertical mouse from CSL, model 300569 (sold on Amazon)
- a Hama model 62807
- a Serioux Baran gaming mouse (this one is the trickiest)
The 2mm ones are a bit thicker and have a fillet, use them if you intend to sand them down a lot (or prefer thicker feet).
The 1mm ones are ready to install directly.
Ideally, these should be printed in nylon (the lowest friction). Printing on a smooth PEI sheet should give you a nice and smooth surface already. Should you wish to polish them some more, I highly recommend getting a set of Micromesh pads which go up to 12000 grit.