1 / 7
Support for the filament sensor of the Anycubic Chiron — zdjęcie 1
1 / 7

Support for the filament sensor of the Anycubic Chiron

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Support for the filament sensor. ATTENTION: Incompatible with the original position of the cable guide chain.

Ocena
0 / 5
Polubienia
3
Pobrania
47
Wydruki
0
Wyświetlenia
407
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Support for the filament sensor of the Anycubic Chiron. 

ATTENTION: Incompatible with the location of the printer's original cable guide chain.

Recommended for direct extrusion, guiding the filament with teflon tube.


List of necessary material:

  • 2  screws M3x16mm cylindrical head preferably, fix filament sensor to support.
  • 2 nutd M3 for previous screws.
  • 2 screws M3x12mm cylindrical head (to fix the teflon tube).
  • 2 screws M3 x 10mm cylindrical head (to fix the filament support to the X-axis bridge).
  • 1 Tie 4mm x 50mm for fixing the filament sensor cable to the support.


Printed with Anycubic Chiron, PETG material, layer height 0.24, line width 0.44, 3 perimeters, 15% infill.

 

Tagi