1 / 7
Support for the filament sensor of the Anycubic Chiron
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Support for the filament sensor. ATTENTION: Incompatible with the original position of the cable guide chain.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 47
- Makes
- 0
- Views
- 407
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Support for the filament sensor of the Anycubic Chiron.
ATTENTION: Incompatible with the location of the printer's original cable guide chain.
Recommended for direct extrusion, guiding the filament with teflon tube.
List of necessary material:
- 2 screws M3x16mm cylindrical head preferably, fix filament sensor to support.
- 2 nutd M3 for previous screws.
- 2 screws M3x12mm cylindrical head (to fix the teflon tube).
- 2 screws M3 x 10mm cylindrical head (to fix the filament support to the X-axis bridge).
- 1 Tie 4mm x 50mm for fixing the filament sensor cable to the support.
Printed with Anycubic Chiron, PETG material, layer height 0.24, line width 0.44, 3 perimeters, 15% infill.
