More Fun Than Sitting At Home magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A reproduction of a sign I saw at an amusement park. Designed in 4 colors by layer height for easy printing.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
A reproduction of a sign I saw in the queue area of an amusement park ride. Perfect for your collection of fridge magnets or for your vacation home.
Prints in 4 colors, with layer height swaps, so anyone with just about any printer can print this (although using an AMS or MMU does save having to walk into the room to swap filament 3 times.)
There are two versions:
Version A is if you like the look or have a translucent yellow filament. Filament order is: light blue, yellow, hot pink, black.
Version B (my preference) only works if you have a very strong yellow filament, like matte PolyTerra Banana. Filament order is: light blue, black, yellow, hot pink.
Use Arachne perimeters or the thin lines of the black letters won't slice properly. I used a height range modifier to iron the top of only the black layer to fill in all the gaps that the slicer leaves trying to fill in the letters. This will cause a lot of stringing, use a stiff plastic bristle brush to remove it after the print finishes.