4" QuickConnect dust hose adaptor with asymmetrical inner diameter tapers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual-sided 4" QuickConnect (Rockler-compatible) OD, with different tapers on the ID to fit various hoods and machines.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Store bought 4" dust collection fittings are ridiculously inconsistent in size. I have two very similar dust hoods with different ODs, and I made this adaptor primarily so I could use them both with my Rockler DustRight “QuickConnect” hose.
The outer diameter (OD) on both sides fits the Rockler hose/handle, and the inner diameter (ID) has different tapers on each side to fit a variety of machines and other 4" fittings like the hood pictured.
PETG recommended over PLA for strength and flexibility.
Tip: I made this a bit longer than needed, so I could mount it to a ball-joint tripod near my lathe. So unless you need that length, save yourself some plastic and print time by scaling the height disproportionately.
Let me know how you adapt it to your own needs.