Mounting Bracket for J5019 Li-ion 3.7/4.2 Volts Battery Charger Board + DC-DC Step Up Booster Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Provides a convenient way to mount the popular J5019 Li-ion charger/boost module.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 145
- Wydruki
- 0
- Wyświetlenia
- 711
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This 3D printable mounting bracket provides a convenient way to mount a J5019 charge/boost module. Their are retaining tabs on both ends to hold the board onto the bracket, as well as several other stops around its perimeter to keep the module in its proper position. The bracket can be flexed slightly to allow the board to be snapped into place, and then the bracket secured with screws to whatever it's to be mounted to. If the module ever needs to be replaced, it's best to remove the bracket screws and flex it again to release the module. This minimizes the chances of breaking off the retaining tabs.