1 / 5
Mounting Bracket for J5019 Li-ion 3.7/4.2 Volts Battery Charger Board + DC-DC Step Up Booster Module — image 1
1 / 5

Mounting Bracket for J5019 Li-ion 3.7/4.2 Volts Battery Charger Board + DC-DC Step Up Booster Module

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Provides a convenient way to mount the popular J5019 Li-ion charger/boost module.

Rating
0 / 5
Likes
10
Downloads
145
Makes
0
Views
711
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

This 3D printable mounting bracket provides a convenient way to mount a J5019 charge/boost module. Their are retaining tabs on both ends to hold the board onto the bracket, as well as several other stops around its perimeter to keep the module in its proper position. The bracket can be flexed slightly to allow the board to be snapped into place, and then the bracket secured with screws to whatever it's to be mounted to.  If the module ever needs to be replaced, it's best to remove the bracket screws and flex it again to release the module.  This minimizes the chances of breaking off the retaining tabs.