12V AC Adapter Terminal Connector Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small design used to hold a terminal connector plug onto a surface.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This isn't technically a remix, but I'm designed it to be used with the Motorized Spool Winder, so I'm adding it here.
I wanted a way to permanently mount the 12V AC adapter terminal connector's plug onto a piece of wood along with the spool winder, so I came up with this.
Here is the exact AC adapter I purchased:
https://www.amazon.com/dp/B0852HX9HV
The terminal connector is then wired into the speed controller/driver of the Motorized Spool Winder remix, and held down with two small screws. The mount is designed to be a snug fit to not allow any movement when plugging/unplugging the round AC adapter's plug.
Print with supports on the screw tabs, I've uploaded a picture showing where to manually support in Bambu/OrcaSlicer.