1 / 7
8x55 pin for clothing drying rack (Meliconi Stendimeglio 60) — zdjęcie 1
1 / 7

8x55 pin for clothing drying rack (Meliconi Stendimeglio 60)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A spare clothes drying rack made for a Meliconi Stendimeglio 60 drying rack

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
160
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a quick design for a Meliconi Stendimeglio 60 clothes drying rack (see photos) to replace the damaged original. The pin has a length of around 55 mm (without the handle), diameter is 8 mm.

Printed with PETG, tree supports, 0.24 mm layer height, situated horizontally (to ensure maximum strength).

I would recommend classic line suports instead of the tree supports, as it can be hard to remove them from the flat handle surface of the pin.

Hope it comes in handy, maybe for somthing else than this specific clothes rack, if so be sure to share your application for this part!

Tagi