Universal Lack Leg Mount Using Zip / Cable Ties (Screw Free!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A way to mount cameras, tools, etc. to your lack enclosure without creating holes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I wanted a way to mount a camera (or tools) to the leg of my lack enclosure without creating holes, so I designed a mount that is held by a zip tie. You should be able to “pull open” the mount to slide it around one of the table legs. Then all you do is put a zip tie through the two holes in the back and tighten. There are ridges on two of the inside walls to help grip the leg. I have uploaded the STEP file for folks to add whatever they want to mount.
I printed one of these using PLA+ but PETG might be a better just because of the added flexibility. These are the settings I used but you can change them as necessary.
| Layer Height: | 0.28mm |
| Perimeters / Walls: | 4 |
| Top / Bottom Layers: | 3 |
| Infill: | 30% |
| Supports: | None |