1 / 3
Demonstration Bevel Gears (2 to 1 Ring to Pinion Ratio) — zdjęcie 1
1 / 3

Demonstration Bevel Gears (2 to 1 Ring to Pinion Ratio)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A set of bevel gears where the pinions have half the teeth of the ring gear.

Ocena
5 / 5
Polubienia
39
Pobrania
418
Wydruki
1
Wyświetlenia
1414
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

A set of bevel gears where the pinions have half the teeth of the ring gear. This results in a 0.5 reduction in angular velocity from the drive gear to the free gear.

The holes are designed for 8mm diameter shafts, and the free gear sits on a 608 bearing. The pinion is the drive gear, and has a tooth for a shaft with a ~10mm flat. The gears are designed with no backlash, it is intended to be fabricated from a pliable non-metal material that will still work at that high a tolerance and wear in quickly.

Tagi