1 / 3
Demonstration Bevel Gears (2 to 1 Ring to Pinion Ratio) — image 1
1 / 3

Demonstration Bevel Gears (2 to 1 Ring to Pinion Ratio)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A set of bevel gears where the pinions have half the teeth of the ring gear.

Rating
5 / 5
Likes
39
Downloads
418
Makes
1
Views
1,418
Reviews
1

Updated at source:

Model information

License
Creative Commons — Public Domain

A set of bevel gears where the pinions have half the teeth of the ring gear. This results in a 0.5 reduction in angular velocity from the drive gear to the free gear.

The holes are designed for 8mm diameter shafts, and the free gear sits on a 608 bearing. The pinion is the drive gear, and has a tooth for a shaft with a ~10mm flat. The gears are designed with no backlash, it is intended to be fabricated from a pliable non-metal material that will still work at that high a tolerance and wear in quickly.

Tags