MINI 13: Sandman
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Son of a beach!
- Ocena
- 0 / 5
- Polubienia
- 175
- Pobrania
- 482
- Wydruki
- 1
- Wyświetlenia
- 2909
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The fourth member of the Sinister Six, Sandman. I've included both sand legs and a sand pillar that is meant to replace everything from the waist down. I used the Fuzzy Skin feature to achieve the sand texture on the hand, hammer, legs and pillar. Using the fuzzy skin feature also means that you will have to clean up some of the fuzzy skin from inside the sockets on the Legs, hand and hammer and the ball on the pillar.
This design is meant to replace the Mini 13 armor. On top of downloading my files, you will still need to download the Mini 13 frame.
I print everything with a layer height of 0.12 mm and a speed no faster than 50 mm/s. In my experience, printing any faster than that can cause the fit between parts to be too tight, sometimes to the point where they won't fit.
Also Pictured is Mini 13 Spiderman Venom Symbiote Suit by Printables user maskedman