Prusa Allen Keys Holder - No MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you're tired of spending your time tracking down your allen keys like I am, here's a magnetic holder.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 73
- Wydruki
- 2
- Wyświetlenia
- 420
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Seems like I spend an inordinate amount of time tracking down my allen keys. So, I found ToolsToMars awesome allen key holder and remixed it. I kept the same basic shape but changed the holes for the keys by adding negative spaces that can be resized to accommodate whatever size allen kays you want to put in it. Currently it's set up for the allen keys that come with the MK3S+ kit. I made them fairly tight on purpose because during testing I found that the plastic wears pretty quickly.
I also added some space to the back with resizable negative spaces for magnets. It's currently set up for round 10mm (wide) x 2.6mm (thick) magnets. The file has a “filament change” to pause the print so you can place the magnets. Be sure to coat the top of the magnets with glue so the filament will stick. It would also be a good idea to use a nozzle that isn't magnetic. If you change to a thinner or thicker magnet, you'll need to move the “filament change” pause accordingly.
There is also another filament change at the top so you can use a different filament color for the PRUSA Research logo.
No supports are needed and an MMU is not required.
NOTE: This remix was made using PrusaSlicer 2.6 Alpha 6 specifically. Negative spaces may or may not appear properly on other slicers.