1 / 1
FLSUN SUPER RACER UTOOLHEAD REMIX REINFORCED — zdjęcie 1

FLSUN SUPER RACER UTOOLHEAD REMIX REINFORCED

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A remix to improve the long-term reliability of this toolhead

Ocena
0 / 5
Polubienia
23
Pobrania
162
Wydruki
0
Wyświetlenia
1465
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I took the excellent work by VICLER which you can find on cults3d or thingiverse at the following links.
https://www.thingiverse.com/thing:5434220
https://cults3d.com/en/3d-model/tool/flsun-super-racer-utoolhead 

MY REMIX
The project was very cool and interesting but had one flaw (in my opinion), the blower fans are only fixed with hot glue. I preferred to create supports to keep them fixed (it takes weight but not too much either). These are the pieces printed in red. I also leave the complete step for those who want to modify.

Hey! 4x inserts of 5.7 length and 4mm diameter must be used. I used the ones from Ruthex at the following link https://amzn.to/3KxBaVO

 

Tagi