Mac Mini mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a Mac Mini mount, did not like the others that slide and have the screws inside.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 1738
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is made for ABS and its shrink, so for PLA it may be slightly large print 99% maybe. M4 M5 25mm screws. Fits a X1C Bambu without flow calibration. Needs supports and brim is not bad at the borders of the plate at least for ABS.
Not tested for heat so be sure to check temperatures of the mini before and after mount.
There is no access to the powerbutton as my mini will be allways on so you will need to
sudo systemsetup -setrestartpowerfailure on
to be able to boot the mac by power cord.
Adding a version with power button access also.
Added the STEP files, as this is the way.