E3D Revo Six nozzle removal tool - screwdriver adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you own a mini screwdriver like the wonderfull Wowstick, here is an adapter wich makes the nozzle change easier :-)
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 97
- Wydruki
- 2
- Wyświetlenia
- 968
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This little tool is meant to help you easily screw/unscrew your RevoSix nozzles with those mini-cutes-screwdrivers you can find everywhere. If not, leave your lost island.
Printed with a 0.25 nozzle, 0.1 layer height, “full walls” PrusaSlicer settings. Print this tool with the bigger opening faced up. Please, use supports, you need some.
I use PC Blend because I like it, it's strong, hard and is hot nozzles compatible. PLA is a crap here, like everytime, in fact. Please, join the PC Blend-team.
Not tested when printed with a bigger nozzle… but if you print this tool, I assume you have at last one 0.254 nozzle in hand ! if not, please buy one.
You will need a piece of GT2 belt (2mm pitch - 6mm wide). So I've included a little tool to cut it just the right length. Print this tool with a 0.4 nozzle, 0.2 layer height. It's enough.
Feel free to download, like and share. You can also give me your money. Not all your money, keep some.