Amateur Radio Antenna Cable Labels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Label tags for Amateur Radio Cables
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 143
- Wydruki
- 2
- Wyświetlenia
- 1293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Easy tags to place on the ends of my cables so I can quickly grab one without having to figure out the length and type. Makes it easier when you have several cables that you reference often. I print 2 of each to place on each end of my cables.
I am including samples for both RG8X and LMR400 cables but any other could be set using the parameters in the source file.
These are printed out of PETG at 15% infill with no supports needed. I print the tops separate from the bottoms so that I can change colors for the text. To do this on the tops select a filament change in your slicer at 5.2mm. The tops are attached using M3 x 8mm wood/metal screws.
I do all the design in OpenSCAD which is free. The source file is included here so you can customize it for your needs.