1 / 3
The Better PrintDry filament container Clip (Print-In-Place)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you also think the normal clips for the PrintDry filament containers suck? well this is the model for you!
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 60
- Wydruki
- 2
- Wyświetlenia
- 286
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (0)Kolekcje (20)Powiązane
Do you also think the normal clips for the PrintDry containers suck?
Well this is the model for you! Not only does this new clip design solve the problem with the original design it is also *almost* Print-In-Place! The BEST part is the clip will NEVER be able to just fall apart because of our innovative amazing totally pattern pending (JK) design which has the Lock and Clip interlocked by the Print-In-Place process!
The model comes in 2 types:
- Variant A: 98% Print In Placeable, only 2 small supports need removing
- Variant B: Printing Supports Needed, this version does NOT have the small supports and will need you to ENABLE print supports to print successfully
Recommend Print Settings:
- Material: PETG or ABS
- Layer height: 0.1mm to 0.15mm (Higher heights not tested!)
- Brim: 3mm (Only needed if not using glue on print bed)
- Supports: ONLY needed for variant B!
- Infill: 85% to 100% (Might break after longer use if under 85%)
- Skirt: 1 Loop, 5 Layers