Base for a .5 liter High Pressure Air bottle (HPA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of those tall skinny bottles tipping over? Constantly? Here is one way to solve that problem.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have been using a half liter bottle to do some testing and they are SO top heavy, it was driving me nuts. This design has a boss in the collar that is sized at .201" (#7 drill bit) which is the standard hole for a 1/4"-20 tapped hole. Eventually I plan to use a nut insert, but I don't have any yet. I DO have a bag of nice thumb screws in, you guessed it, ¼"-20! Could easily use an M5 or M6 as well. I do use a short piece of plastic between the screw and the bottle, no sense marking that up for no good reason. More photos to follow!