Base for a .5 liter High Pressure Air bottle (HPA)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tired of those tall skinny bottles tipping over? Constantly? Here is one way to solve that problem.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have been using a half liter bottle to do some testing and they are SO top heavy, it was driving me nuts. This design has a boss in the collar that is sized at .201" (#7 drill bit) which is the standard hole for a 1/4"-20 tapped hole. Eventually I plan to use a nut insert, but I don't have any yet. I DO have a bag of nice thumb screws in, you guessed it, ¼"-20! Could easily use an M5 or M6 as well. I do use a short piece of plastic between the screw and the bottle, no sense marking that up for no good reason. More photos to follow!