1 / 2
GTX-Carriage Rework 1.0
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Geeetech printers (at least the Prusa i3 Pro B) use the X-carriage to reach the endstop, and since I wanted to try the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Geeetech printers (at least the Prusa i3 Pro B) use the X-carriage to reach the endstop, and since I wanted to try the Rework 1.0 extruder, I've modified the original prusa i3 x-carriage to fit into my printer.
- 4 holes (near the zip ties) to use for the Rework 1.0
- 2 holes (near the belt) to use back the original MK8 Extruder if you need it.
Note : This x-carriage DO NOT make use of the two LME8LUU in original geeetech x-carriage, you will need4 x LME8UU* linear bearings with this one*.
Instructions
- I've modified the prusa i3 x-carriage and add the "arm" used in GT printers to reach the x-endstop
- Add holes to support the Rework 1.0
- Try to fit the holes used for the original MK8 extruder, in case we need to switch back.
Category: 3D Printer Parts