1 / 2
GTX-Carriage Rework 1.0
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Geeetech printers (at least the Prusa i3 Pro B) use the X-carriage to reach the endstop, and since I wanted to try the…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Geeetech printers (at least the Prusa i3 Pro B) use the X-carriage to reach the endstop, and since I wanted to try the Rework 1.0 extruder, I've modified the original prusa i3 x-carriage to fit into my printer.
- 4 holes (near the zip ties) to use for the Rework 1.0
- 2 holes (near the belt) to use back the original MK8 Extruder if you need it.
Note : This x-carriage DO NOT make use of the two LME8LUU in original geeetech x-carriage, you will need4 x LME8UU* linear bearings with this one*.
Instructions
- I've modified the prusa i3 x-carriage and add the "arm" used in GT printers to reach the x-endstop
- Add holes to support the Rework 1.0
- Try to fit the holes used for the original MK8 extruder, in case we need to switch back.
Category: 3D Printer Parts