1 / 6
GoPro to 1/4"-20 adapter for vr trackers and camera stuff
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
slots into the go pro style bracket that chest harnesses and whatnot use.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 618
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Allows direct use of go pro harnesses and whatnot.
I used a ¾" length bolt, but had to cut it short on my attempt; probably would work better with ½".
The parts that interface with the GoPro clip required moderate sanding to fit.
If the bolt does not fit through the whole, heat it for a short time on a stovetop or other flame (carefully with a pair of pliers or similar) and press it though.
