1 / 2
Filler3 Homebrew Can Filler — zdjęcie 1
1 / 2

Filler3 Homebrew Can Filler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An open source 3D printed can filler.

Ocena
0 / 5
Polubienia
17
Pobrania
23
Wydruki
0
Wyświetlenia
707
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

BOM, Build Instructions, CAD, photos and firmware files can be found at https://github.com/N3MI-DG/Filler3 .

 

Quick demonstration video: https://www.youtube.com/shorts/mNCUL84dfJ8 .

Method of operation: 

Press button to start filling process. 

The filler will move to a purge position where it will purge can with co2 for a determined period of time.

 It  will then move to  fill position where it fills the can until the sensor rod detects liquid (sensitivity of which is adjustable via analog value to allow for false positive on foam). 

Once full will move to a post purge position for a burst of co2 to allow for capping on foam and then home position. 

Post purge can be skipped if filling still liquid but setting the post purge duration to 0 in firmware.

 

All files can be printed at 0.3 layer height without supports except Condensation Cover which should be printed at ≤ 0.2 layer height.

Motor Mount should be printed from PETG/ABS/ASA.

Filler Mount pieces should be printed from PETG.

Purge Cap and Feet pieces should be printed from TPU.

Tagi