1 / 2
Filler3 Homebrew Can Filler — image 1
1 / 2

Filler3 Homebrew Can Filler

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An open source 3D printed can filler.

Rating
0 / 5
Likes
17
Downloads
23
Makes
0
Views
707
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

BOM, Build Instructions, CAD, photos and firmware files can be found at https://github.com/N3MI-DG/Filler3 .

 

Quick demonstration video: https://www.youtube.com/shorts/mNCUL84dfJ8 .

Method of operation: 

Press button to start filling process. 

The filler will move to a purge position where it will purge can with co2 for a determined period of time.

 It  will then move to  fill position where it fills the can until the sensor rod detects liquid (sensitivity of which is adjustable via analog value to allow for false positive on foam). 

Once full will move to a post purge position for a burst of co2 to allow for capping on foam and then home position. 

Post purge can be skipped if filling still liquid but setting the post purge duration to 0 in firmware.

 

All files can be printed at 0.3 layer height without supports except Condensation Cover which should be printed at ≤ 0.2 layer height.

Motor Mount should be printed from PETG/ABS/ASA.

Filler Mount pieces should be printed from PETG.

Purge Cap and Feet pieces should be printed from TPU.

Tags