EPOS IMPACT DW Headset Holder Improvement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Foot to lift the holder for the headset loader for more convenient handling with 2 ears headphones.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
I made some modification to the headset holder from EPOS Sennheiser model as for the 2 ears headphone the microphone and one earphone always touched the ground.
And I didn't want to clean the desk with my headset microphone… :-)
Needed Material
- M4x25mm countersunk head screw to replace the original M4x12mm type. It will lift the cube of the base station by 15mm.
Assembly Instructions
There is a countersunk screw in the middle of the base plate which you can feel by touching the foam on the bottom. Here you have to cut out a part of the foam.
Now you can unscrew the base plate.
Add the new foot an screw it together with the 25mm replacement screw.
Printing
Filament: For aesthetics I used XPETG, but basically all types should do
Infill: I used 30% which seems to be enough
Support: Foot is designed to be easily printed without any support