EPOS IMPACT DW Headset Holder Improvement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Foot to lift the holder for the headset loader for more convenient handling with 2 ears headphones.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 292
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
I made some modification to the headset holder from EPOS Sennheiser model as for the 2 ears headphone the microphone and one earphone always touched the ground.
And I didn't want to clean the desk with my headset microphone… :-)
Needed Material
- M4x25mm countersunk head screw to replace the original M4x12mm type. It will lift the cube of the base station by 15mm.
Assembly Instructions
There is a countersunk screw in the middle of the base plate which you can feel by touching the foam on the bottom. Here you have to cut out a part of the foam.
Now you can unscrew the base plate.
Add the new foot an screw it together with the 25mm replacement screw.
Printing
Filament: For aesthetics I used XPETG, but basically all types should do
Infill: I used 30% which seems to be enough
Support: Foot is designed to be easily printed without any support