Counting matching models…
Expanding on the space-efficient socket holders I previously posted , I've now created a set of holders specifically designed for deep impact sockets! If you're curious why some sizes are skipped, it's because these are the sizes included…
Note** Never been real world tested. Designed to be spit horizontally and installing connectors as your choose. Let me know if there is anything I can do to make this model better.
A Packout insert made for the popular Milwaukee Gen 2 M12 ½in or 3/8in impact wrench. As well as a compartment for a M12
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
3D model description 📢 For commercial use, join our Patreon at: 👉 www.patreon.com/PrintForgeAU ONLY $10 per month! This custom 3D printable insert is designed for the Milwaukee Packout M12 toolbox, providing a precise fit for your M12…
I took rtj's design and expanded it to 36 cm., please refer to the description of rtj, that is the real job.
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the Fx Impact. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the pellet is…
This is an insert for the Milwaukee Packout Organizer (48-22-8430). The left side is designed for the Impact Socket Set (49-66-7009). The right side holds one 5aH M18 battery (48-11-1850) and will be used to hold a 3/8" Drive Impact…
Proved FX Impact Extended GEN4 magazine for 30 x 5.5mm (.22) pellets. You will need to build a suitable spring or adapt one by modifying its connection to the case and crown. A spring of 19 mm x 0,02" is recommended. This model, unlike…
This is a digital 3D printable model of Flin's Spear - Bloodsoaked Ruins Polearm - from Genshin Impact. Designed as a life-size cosplay prop, it features a slot for a wooden rod to reinforce the polearm. Each section includes a locking…
Es un copo de nievo con una clara inspiracion en en la clase cryo del Ghenshin impact
This inserts is for the Milwaukee sockets, 1/2 Impact and 5.0 Battery. ✅ COMPATIBILITY Sockets Supported 1/2” Drive SHOCKWAVE Impact-Duty Metric: 10mm – 24mm SAE: 3/8” – 1-1/2” Designed for Milwaukee deep-well sockets Tool Compatibility…
This is a remix for the well-fitting mount made by Kavelry3D for the Milwaukee M12 drill/impact/hammer drill mount to mount under a shelf. Mounting surface is at 45 degrees which requires it to be mounted pretty near the edge of a shelf…
I bought a pair of Epos Impact 1060 on ear headphones when my old Jabra one ear broke. The new headphones have amazing sound and I really like them BUT they are squeezing my ears. So I can't wear them for more than 30 minutes :( So the…
This model is a divider that fits inside the tstak box of dewalts DCF982NT impact driver. Each of the circular divisions is 75mm deep and has a diameter of 30mm, it can hold the inbus bits for this impact driver and could potentially fit…
Dayuan Gridfinity Impact Socket Adaptor Holder Steel Adaptor Reducer 1/4 3/8 1/2 3/4 Inch Square Drive Female to Male DAYUAN 6pcs Impact Socket Adapter Set, Chrome Molybdenum Steel Adaptor Reducer 1/4 3/8 1/2 3/4 Inch Square Drive Female…
Basic organizer for impact (or not) sockets. Mostly for Metric sizes but includes some Inch sizes (and I imagine some of the metric sizes would be compatible). I originally design this to fit into the packaging boxes for a Prusa…
Textured Waffle Paddle (Modular Handle + Head) A 3D-printable modular paddle with a waffle-style texture designed to leave a clear, consistent imprint while keeping edges smooth and comfortable. The model is split into a handle and paddle…
This is a remix of the holder by WICKID. You will need 2 x (9 mm Small Thread, Flat Head, T-Bolt) to mount this. You can find the T-Bolt model at…
This is a high-strength 3D-printable adapter designed to bridge a 17mm socket wrench with a specific internal metal component. After several iterations, this model has been optimized for high torque resistance and a perfect fit. Key…
Printed in PETG without supports but this would also be fine in PLA. Print with clip side down, 0.2 layer height Clip is strong enough to hold impact bits of varying lengths and indents.
I'm having trouble removing the Foster connector from my FX Impact with my fat, old fingers after loading it. I don't know why the designers at Fx Airguns didn't add that little tab to make removing the connector easier, but well, the…
Custom Inserts for the Milwaukee Packout Organizer (48-22-8430) to store Milwaukee Gen2 High Torque Impact and Harbor Freight Impact Sockets. Once printed, you will have to cut part of the packout "middle" wall to accomodate the anvil of…
Anschutz-style field shooting grip for the FX Impact M4 (and FX DRS Tactical) (for large hands). May be compatible with other rifles with AR-style grips. I've always liked the excellent grip of this Anschutz grip, so I adapted it for my…
Description These energy burst / impact effects are designed to add dynamic action to figure displays, dioramas, and toy photography. They’re inspired by the classic comic and cartoon style “impact burst” effects seen in superhero shows…
Give your pet a tougher, smarter play experience with this impact‑resistant TPU Treat Ball. At 130 mm, it’s easy for pets to roll and chase, while the 22 mm treat hole fits standard dog kibble. A raised exit edge makes treats harder to…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Varka Cosplay Accessories Set from Genshin Impact. The supports…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Varka Cosplay Set from Genshin Impact. Including all accessories, hand,…
This Dewalt DCF894 Impact wrench mount for wall or under counter has proven to be an easy to mount and super convenient to use. Tested and fits Dewalt DCF894 with great precision. - Made to precision, this will hold your drill firmly. -…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
Depending on your everyday work or chores, you don't need EVERY socket cluttering up your workspace. I looked at the sockets I actually used and made a little holder for them. I made a rookie mistake when printing open characters. You…
I F**KED UP THE SCALE. MULTIPLY SCALE BY 10. A laser scan of my M12 Stubby Impact.
Nice print to "upgrade" youre Impact M4 case. Or just to print for other usages.
I printed the various socket organizers, and my son has this set of Pittsburgh color-coded metric deep impact ½" drive sockets he asked me if I could print him a tray. I couldn't find one already made, and did find the actual sockets…
This is a remix of https://www.printables.com/model/6320-bosch-gsr-12v-15-battery-screwdriver-holder This version changes the right hole to fit the Bosch 1/4 in. Impact Driver Holder 12v:…
Holds the following impact sockets deep and shallow from Maximum Brand (might work with others) 10, 11, 12, 13, 14, 15, 17, 18, 19, 21, 22 (shallow and deep 24 (deep) extension universal joint Fits the 48-22-8436 packout Printed in PETG…
Double Impact is a flycore-based, dual talon mag-above grip, full auto flywheel pistol. it was created with three goals in mind: Be the most compact (excluding mags) dual magazine blaster. Be one of the fastest firing homemade blasters in…
I needed a few more of the impact dust covers for my Magpul P-Mags. I found the one that @smc_246581 had created. I update that model to be a little thicker on the ears as well as adding some 45 degree chamfers so it would print with less…
This is a 1x6 gridfinity organizer made to hold the 4-piece, 1/2 in Drive Impact Socket Extension Set from Harbor Freight. Due to the size of my printer, I printed it in two pieces that combined using a mortise and tenon with super glue.…
The attached file has a pause where you can change the filament color. I started with red and finished with blue for the red glowy-eyes effect. Then, I made it into a sticker for my latest design of hinged dice tower. If you found this…
This wall mount is for Dewalt drill style form factors. I've tested it with the Impact, Drill, and Heat gun. In theory it should also work for the wire stripper, larger impact, caulking gun and spotting light. However I don't have those…
Insert for Milwaukee Packout 48-22-8435 Recommend printing in red ASA or other robust plastic, I used 0.2mm layer height with 3 wall loops, alternate extra wall, 7% honeycomb infill. I had to slice it to fit on my Bambu X1C 256mm print…
Gridfinity tray for WERA 2090/17 impact
I use this rack for my MotoMaster impact socket set, only deep 1/2 atm, working on shallow metric and imperial rack. You can add a filament change half way through the base to have the labels stand out. Enjoy :) (note picture was a…
This is a speedloader created some time ago, for FX impact high cap magazine .25 Add a tiny bit och grease on the small contact points, might be a bit stiff the first couple of uses.
Socket holder for the 17pc Olsa Tools Stubby Impact 8-24mm 3/8dr set. Should also fit the Astro and Husky rebrands.
There are 2 files here, one for the 12V tool and one for the 20V tool. Both hold 3 hex bits. Printed on Prusa MK3 with PLA. No supports needed.
Only the best ever, most tremendous kobalt 24v MAGAnetic ¼" hex bit holder. We choose to use the yogi bear spelling of MAGAnetic. use a 4mmx12mm long button head fastener to attach. use 8mm dia 3mm thick N52 magnets for best results.…
It will last longer if printed with a high infill. Any sort of support such as a Like or a Rating will be apreciated
A somewhat rough but high poly scan of a DeWalt impact driver. The battery is attached but not fully scanned and there was a little wear and tear on this tool. This should aid in designing mods, accessories, mounts and various other…
A snap on drill bit mount fitting a Ryobi One+ Impact Driver. The mount fits 5 bits. Can be printed in PLA, PETG, ABS, etc.
My son, who works in the IT field, asked me to make him a protective cover for his Samsung MODEL MU-PC1T0T solid state drive. Since the drive itself is solid state, it's already somewhat impact resistant, but he carries these drives all…
Univerzalni drzak na vrtacku, razovy utahovak. Parkside zelene do toho pasuji. I svitilny na Parkside baterie.
A dual 1/4 inch driver bit holder designed to fit 18v Makita cordless drills and impact drivers. Attach with an M4 x 10mm screw. Slide bits in or out from the front following the arrows. Works best with 3 inch long bits. Print Settings…
Print it in whatever material you want. PLA works just fine for this. For the contrasting color, switch filament at the appropriate layer. You will need 4 m3 x 4'ish mm heat set inserts and 4 M3x8 socket head cap screws.
A wall mount tool holder for your DeWalt DCF787 ¼" Impact. Vertical screw holes so it can be mounted to a single wall stud. You will need 4 m3 x 5mm heat set inserts and 4 M3x8mm socket head cap screws.
This is an easy to print attractive cheek piece for the FX impact. I have a MKII, but I think it fits the other versions as well. The steepest overhangs are 45deg the lack of top, bottom and side surfaces, when printed as shown, make the…
TPU Protective cover for the Milwaukee 2962 M18 1/2” impact wrench. This set is comprised of three files. A front nose-piece, a rear cover, and a fastening pin, a pair of which secure the two covers together. The pointed end of the pin…
3D Printed Peglock version of a standard pegboard mount that I used to mount my drills. Requires supports to print. Compatible with 1" pegboard. Two models are included, the drillholderasm.stl should work with most green Makita tools. The…
Moved the holes back from the hex slots, thickened the body a bit to support pan head screws. The original (left) created holes, I moved the magnet holes 1mm from the hexagonal area to create solid walls. I also changed the screw head to…
A inspiration of azhdaha tree from genhsin impact ! completely handmade ! I cut it in several pieces to print it :) Use for decoration of Pogona terrarium :)
Designed based on the handle of a Dewalt DCF787. I cannot confirm whether this will fit other Dewalt tools. Features Positive retention on the bits so they do not fall out Produces a satisfying snap when bits are inserted into the holder…
This is a wire nut impact driver bit. I printed at 100% infill for max strength. Simply place the wires in the bit end that you want to twist together, then pull the trigger on the drill bit. Get a perfectly aligned wire twist every time.…
Holds your Milwaukee 2953-22 M18 Impact Driver to an IKEA Skadis pegboard If you're seeing the other Skadis holders in this image and want those instead, check my profile. Designed for use with T-slot nuts. I personally like these , but…
made a insert for the slim packout 43pcs 3/8 impact set with a 1/2 to 3/8 icon reducer also with 1/2, 3/8, & ¼ impact drives from milwaukee it is tight fitting and made so the sockets don't move around. edit: made a v2 version i have yet…
-Extended & cut the back 3 degree to be able to mount slightly down hill to help the tool stay in. -Changed the holes to #8 taper head screws
gridfinity Milwaukee M12 Impact and drill insert
This is a fan art of Hutao from Genshin Impact. Let me know if you spot any issues, and I would love to see your print! Contact me: Twitter @ CHCH1818
Holder for 3 extension lengths: 75mm, 125mm and 250mm. Made specifically for the Biltema 71-149 set (https://www.biltema.se/verktyg/handverktyg/hylsverktyg/krafthylsor/kraftforlangare-12-3-st-2000032235) This is my first model, i have not…
I designed a wall mount for my t-key set. It contains a t-key and five impact sockets (13, 12, 10, 8 mm and a bit adapter). It has two wholes with bevel to srew it at the wall. This is my T-key set: Link Print Settings Printer Brand:…
Gridfinity holder for the 13" Klein Ratcheting Impact Rated Screwdriver
Doporučený materiál: PET-G Doporučená výška vrstvy: 0,2 mm Pro tisk nejsou potřeba podpěry. Pro zvýraznění textu je použita změna barvy vrsty. Pro montáž je potřeba šroub s válcovou hranou a vnitřním šestihranem M3 x 14 mm. Samojistná…
Inserts for the Packout organizer designed for ½ in. Drive SAE and Metric Tekton deep impact sockets, size ranging from 8 - 38mm and 5/16 - 1-½ in. as well as the universal joint, 3 in. extension and 10 in. extension. These inserts were…
My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 Fuel Impact…
The Knave from Genshin Impact known as Arlechino the one on photos are printed 25x25 scale.
The bit holder lets you store up to 4 bits, it clips on very firmly onto the tool. Prints easily without any supports needed.
We went through too many plastic poop bag holders with all the bells and whistles that would break the instant the leash was yanked out of your hand. I was sick of them breaking so I designed a more durable version. Sized to fit standard…
Expanding on the space-efficient socket holders I previously posted , I've now created a set of holders specifically designed for deep impact sockets! If you're curious why some sizes are skipped, it's because these are the sizes included…
Can be printed without supports. Designed to be printed with 0.6mm nozzle and at least 3 perimeters. Can use other nozzles, use more perimeters for higher strength.
Ability to hold 13 bits (4 long bits/adapters + 9 short bits) Easy to insert/remove bits with precise tolerances, no magnets needed Locks in place securely with 2 belt clip screws (2x 3x10mm https://amzn.to/42ltgbb ) Driver/drill can…
You can change any dimensions via Fusion 360 user parameters to fit any existing drill model. If you don't have fusion 360 please contact me with your drill dimensions so I can change the model to fit these drills as well. All comments…
1/2 inch (12.5 mm) square ∙ hollow Impact socket set ∙ Outside hexagon traction profile Wrench sizes 17 ∙ 19 ∙ 21 mm Item number: 903SPC/3 If you have any questions or need anything else, please let me know. IF YOU PRINT IT, I WOULD…
This is a drop-in socket organizer for the Milwaukee PACKOUT 5-Compartment Low-Profile Organizer that holds the SHOCKWAVE Impact Duty 3/8 in. SAE Deep Impact Rated Socket Set (8-Piece), SHOCKWAVE Impact Duty 3/8 in. Metric Deep Impact…
This is the first (finished) model of my goal to make 3D Printed french cleat mounts for all of my power tools in the garage. The “arms” on this design act as mild springs so that the drill slides onto it like it was a battery (battery…
Universal Impact Driver/Drill Bit Holder A universal cordless Impact Driver/Drill Bit Holder meant Instalation requires: 1 x Brand dependent screw ( check sheet below ) 2 x Neodymium Magnets 20x10x2 mm ( example ) Brand Screw Type Bosch…
Protect all kinds of rack mounted gear from mechanical frontal and side impacts. These protectors are meant to be mounted over the gear panel, using the existing rack screws. They should fit over the knobs and align vertically with most…
EN: For my old BD250 impact drill from Black&Decker, I reduced the recess to a 22 mm radius using the great idea from 3D-Kalle . Material: HT-PLA / PLA Layers: 0.3mm Supports: recommended in the area of the recesses for the spirit levels.…
Organize your 1/4, 3/8, and 1/2 drive impact adapters. Designed for Wall Control mounting. Will not work standalone as the holder is not tall enough. Pick whatever material you want, I used ASA No supports needed Uses standard wall…
Hanging holder for drill. Intended to hang on underside of overhead cabinet. Not tested but may fit other drills (2.75" ID). Designed in Onshape. Link in case you want to copy and modify:…
Features: Dual Izod and Charpy Impact tests Notchless sample pieces allow for accurate comparison between 3d printed parts, as well as lasercut plastics and woods. Replacable Tips Space inside hammer for additional weight (76x M5*5 nuts…
I needed a bit holder for my drill when switching back and forth between Phillips and Robertson hex bits. Couldn't find a simple one that I could buy so I made one. There is the external holder and 3 different size inserts, to compensate…
Gridfinity Impact Socket Holder for Performance 10 Piece 1/2 Inch Drive 6 Point Metric Socket Set M593DB
