Multiboard Milwaukee Drill & Impact Holders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
V2 ! Multiboard holders for Gen2/Gen3 Milwaukee drills & impacts facing either left or right for quick grabbing.
- Rating
- 4.25 / 5
- Likes
- 69
- Downloads
- 486
- Makes
- 4
- Views
- 1,625
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
V2 HD Now up ! Based on feedback, the HD version now includes lips on the end of the arms.
Multiboard holders for Milwaukee M18 drills and impact drivers.
- Left or right facing (your choice).
- HD or LD (Recommend HD for full size/bigger).
Print Settings:
tl;dr: 3/3/3 | 30% Gyroid | Auto Tree supports | Auto Brim
Layers: 3 Walls/3 top layers/3 bottom layers
Infil: 30% Gyroid
Supports: Auto Tree
Brim: w/ 0.1mm gap
Multiboard Interface:
You will need these to attach to multiboard per drill/impact you are hanging up. I.E. if you are hanging up 2 drills, multiply (x) by 2.
Per Holder:
(2) Heavy Weight-Bearing Hook Snap
(2) Moderate Weight-Bearing Snap
(4) Small Thread - Multipoint