1 / 3
Simple human soap holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for whatever soap you wish for simple human wall mount
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
One of my liquid soap holders fell on the floor and broke. I then wanted a way to mount soap to the wall.
It is made in two parts with threading in between. This is because the bottom has a solid, flat floor (with a water-runout hole) and the top has the pegs for the wall mount.
The threads should be snug and tight enough in itself, but you can also use some glue to hold it even tighter :)
The hole is about 8cm tall and 6cm diameter
Let me know if there is anything you need for this model.
And please check out my other models :)