B.A.T.C.H - Bed Adhesion Test and Calibration Hexagonal-polyhedron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brand new way of testing your printer accuracy and bed adhesion!
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 76
- Wydruki
- 3
- Wyświetlenia
- 500
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
Tired of using boring and easy to print calibration cubes?
Now you can use a brand new B.A.T.C.H. (Bed Adhesion Test and Calibration Hexagonal-polyhedron)
You will test your bed adhesion with a small area of 66.725mm^2 (8.16x8.16mm), and at the same time your printer accuracy.
Being accurate in X Y and Z is easy! Check how accurate is your printer?
Bed Adhesion:
Small contact area with the build plate, challenging your bed adhesion:
Steep Angles:
54,7 degree should be easy on your printer, but if you have cooling issues in one side, you'll notice here.
Small dimension/economical to print:
Only 3,2g or about 1,1m of filament necessary for this test.
What Dimensions you should have on the final print?
Measurement between parallel hexagonal areas - 20.00 mm
Measurement between parallel square areas - 23,088 mm
Happy Printing
Inspired by Prusament PLA HEX, Maybe it will give better results?!