B.A.T.C.H - Bed Adhesion Test and Calibration Hexagonal-polyhedron
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brand new way of testing your printer accuracy and bed adhesion!
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 76
- Makes
- 3
- Views
- 500
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
Tired of using boring and easy to print calibration cubes?
Now you can use a brand new B.A.T.C.H. (Bed Adhesion Test and Calibration Hexagonal-polyhedron)
You will test your bed adhesion with a small area of 66.725mm^2 (8.16x8.16mm), and at the same time your printer accuracy.
Being accurate in X Y and Z is easy! Check how accurate is your printer?
Bed Adhesion:
Small contact area with the build plate, challenging your bed adhesion:
Steep Angles:
54,7 degree should be easy on your printer, but if you have cooling issues in one side, you'll notice here.
Small dimension/economical to print:
Only 3,2g or about 1,1m of filament necessary for this test.
What Dimensions you should have on the final print?
Measurement between parallel hexagonal areas - 20.00 mm
Measurement between parallel square areas - 23,088 mm
Happy Printing
Inspired by Prusament PLA HEX, Maybe it will give better results?!