E3D Tool Changer Hemera Direct Extruder Part Cooling Fan Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Required if your part cooling fan (PCF) is not working on E3D Tool Changer Hemera Direct Extruder
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 745
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The default part cooling fan for Hemera Direct Extruder is directly set up against the Extruder Motor. This causes Electro Magnetic Interference (EMI) with the Part Cooling Fan (PCF), and the PCF doesn't function properly.
The problem is demonstrated here: https://youtube.com/shorts/ScPs9Ft-meA
With this mod, you can lift your PCF to eliminate EMI issues, and the PCF can run at full throttle. Check the photos to understand better how the build will look after assembly.
I have tested this with my E3D Tool Changer, and it works great!
You can read more about my setup here: https://shivdeepak.com/setting-up-e3d-tool-changer
Print Settings
Material: Preferably ABS or PETG. PLA will also work.
Other Settings: Your Printer Defaults Should Work
After Assembly Video: https://youtu.be/mt0P6hmThJI