1 / 1
Airpods Pro Gen 1/2 cradle for LIVBOJ Charger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the design from @Miso89 to have the cable port perpendicular to the cradle instead of parallel.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
Remixed the design from @Miso89 to have the cable port perpendicular to the cradle instead of parallel. I also reoriented the STL to have the top facing down to minimize supports and allow you to use textured PEI to get a textured top surface. I used supports from the build plate although you may not need to in this orientation.