Triple Ring Rope Spanner / Rope Tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spanner/tensioner for 8mm ropes.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 146
- Wydruki
- 1
- Wyświetlenia
- 756
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NOT FOR PERSONAL SAFETY / CLIMBING (I don't know if this sentence is neccessary because this should be clear ;-))
This is a rope spanner / tensioner for 8mm ropes.
It should be as simple as possible to mount/remove the rope.
Update V2.0 - Is better for the rope. In V1.0, the rope clamps itself on the bottom a bit. It's not that bad, but because of that, I made a second version.
Why You should use this model?
Because it's simple to use
- Knot it at the end of a rope
- Swing it around a pole
- Pull the rope through the middle ring
- Lift it over the third ring
Print Instructions
I used 0.4mm layer height with 0.6mm nozzle and about 15% Infill
For outdoor use and durability I will use Pursament ASA or PETG.