Triple Ring Rope Spanner / Rope Tensioner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a spanner/tensioner for 8mm ropes.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 146
- Makes
- 1
- Views
- 756
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NOT FOR PERSONAL SAFETY / CLIMBING (I don't know if this sentence is neccessary because this should be clear ;-))
This is a rope spanner / tensioner for 8mm ropes.
It should be as simple as possible to mount/remove the rope.
Update V2.0 - Is better for the rope. In V1.0, the rope clamps itself on the bottom a bit. It's not that bad, but because of that, I made a second version.
Why You should use this model?
Because it's simple to use
- Knot it at the end of a rope
- Swing it around a pole
- Pull the rope through the middle ring
- Lift it over the third ring
Print Instructions
I used 0.4mm layer height with 0.6mm nozzle and about 15% Infill
For outdoor use and durability I will use Pursament ASA or PETG.