CR-10 Ultimate Bed Leveller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super Simple Bed Levelling CR-10 (or any 300x300 printer) When levelling your bed, straight lines are pretty useless,…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 148
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
Super Simple Bed Levelling CR-10 (or any 300x300 printer)
When levelling your bed, straight lines are pretty useless, to ensure the bed is level you need to print curved lines as only when the bed is level can you print a line that is changing direction.
The in the four corners and the middle are different shapes, you can check to see if these are nice and smooth (bed level), if they are a bit rough like sandpaper you are to close, if they are stringy or do not form a single piece when printed you are to far away.
Slicer Settings: (Cura).
Disable Ironing,
Enable: Print Sequence - One At a time under special mode
Category: 3D Printing Tests