Locking Hinged Carabiner - Print In Place (No Supports)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carabiners with a locking screw, in many shapes and sizes! They all feature a print in place hinge to fit larger stuff.
- Ocena
- 4 / 5
- Polubienia
- 68
- Pobrania
- 242
- Wydruki
- 3
- Wyświetlenia
- 1268
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
It's another carabiner design! This one features a no-assembly-needed hinge that will let you get larger objects inside without effort or flexing (and snapping) the carabiner. Simply print it in place, no support material needed!
There are a bunch of different shapes and sizes to choose from. The nut comes in a knurled and ribbed design, in both loose and tight tolerance versions. I suggest you try the loose version first, and only use the tight if that ends up being too loose for your printer.
The Small and Medium sizes are 50% and 75% of the Large versions, respectively. But they've had the tolerances of the hinges adjusted for better printing than just purely scaling the models.
As with all 3D prints with a screw, you will get the smoothest nut rotation with smaller layer heights.