Locking Hinged Carabiner - Print In Place (No Supports)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Carabiners with a locking screw, in many shapes and sizes! They all feature a print in place hinge to fit larger stuff.
- Rating
- 4 / 5
- Likes
- 68
- Downloads
- 242
- Makes
- 3
- Views
- 1,267
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
It's another carabiner design! This one features a no-assembly-needed hinge that will let you get larger objects inside without effort or flexing (and snapping) the carabiner. Simply print it in place, no support material needed!
There are a bunch of different shapes and sizes to choose from. The nut comes in a knurled and ribbed design, in both loose and tight tolerance versions. I suggest you try the loose version first, and only use the tight if that ends up being too loose for your printer.
The Small and Medium sizes are 50% and 75% of the Large versions, respectively. But they've had the tolerances of the hinges adjusted for better printing than just purely scaling the models.
As with all 3D prints with a screw, you will get the smoothest nut rotation with smaller layer heights.