1 / 5
Full Metal AWD Mod with belt tensioners for the RatRig V-Core 3.1 (remix) — zdjęcie 1
1 / 5

Full Metal AWD Mod with belt tensioners for the RatRig V-Core 3.1 (remix)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I basically merged the original nice designs of @DJ_Designs, @Marv_237793 and @WiggyWooSaa_207419.

Ocena
0 / 5
Polubienia
50
Pobrania
182
Wydruki
1
Wyświetlenia
2609
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to make a fully metal AWD mod including belt tensioners, so basically I merged these three excellent designs to create this mod/ remix (thanks for the inspiration guys!).

I already have it working on my RatRig V-Core 3.1 without any issues I hope you too.

I only included the .f3d and .step files to allow you to adapt it to your setup or improve it ;-).

You can find all the required hardware in the original models:

https://www.printables.com/model/310094-full-metal-awd-mod-for-the-ratrig-v-core-31
https://www.printables.com/model/299097-motor-decouple-damper
https://www.printables.com/model/376193-vcore31-awd-with-tensioner
 

I printed it with ASA filament using supports with very good results.

I will appreciate any idea to improve it. Feel free to contact me in this Discord group.
https://discord.gg/ratrig

 

Tagi