Anti-rattle Spacer for GUB Phone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-into-place spacer to have something to tighten the holder onto if I don't have my phone on me.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 339
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Hi,
As a new member to the electric scooter hobby I got myself a GUB G-85 Phone Holder and noticed it rattles a lot while driving if it's not holding anything. I designed this little clip-into-place spacer to have something to tighten the holder onto if I don't have my phone on me.
Make sure to print the correct size one for your phone, so you don't have to screw too much every time. I have a S9+ in a case that measures 72mm, and so I use the "72mm" type spacer. I generated a bunch of other sizes, so please measure your phone and print correct file.
Spacer just snaps into place from the bottom and just stays in a GUB holder under the phone.
Hope you like it!
Print Settings
Rafts: No
Supports: No
Resolution: 0.32
Infill: 100
Notes:
Walls are 1.2mm. I print with 0.5 nozzle, 2x 0.6 walls.